howard howard .

howard

Why do air bubbles appear in injection molded products?

There are two main reasons for bubbles to appear in injection molding:

 

Bubbles due to the presence of humidity

Reason: The plastic fabric is not really dry,Injection Industryresulting in hydrolysis of the plastic fabric.

Method: fully pre-dry, and observe the heating preservation control of the hopper.

 

vacuum bubble

Reason: The cloth flow on the dense wall surface freezes quickly to prevent shrinkage, which is not satisfactory in mildew, resulting in adjacent vacuum bubbles inside the injection molded product.

Method: Avoid developing structures with different wall thicknesses of plastic products. Proper door position to allow flow of material vertically into thick-walled components. Increase the temperature of the injection mold. Reduce barrel temperature. Improve hitting strain and hold pressure.

 

like:

Why do bubbles appear in injection molded products?

The best way to remedy injection stress

Why is injection molding production stagnant?


برچسب: ،
امتیاز:
 
بازدید:
+ نوشته شده: ۲۲ فروردين ۱۴۰۱ساعت: ۱۰:۳۷:۴۲ توسط:howard موضوع:

ارسال نظر
نام :
ایمیل :
سایت :
آواتار :
پیام :
خصوصی :
کد امنیتی :