?>
فال ابجد      دیدگاه روز      زندگی لوکس      -      روز ۱۰۰      ساناخبر      روانشناسی      اخبار اقتصادی      ابجد      -      گلی شی      دانلود فیلم دوبله فارسی      ویپ چی      روز ۱۰۰      هفت ستاره      روز 100      سینما برتر      -      -      قیمت روز      بلوک سبک      -      قرص تاخیری      آموزش تعمیرات موبایل      *      +      -      *      +      استخر پیش ساخته      تراست ولت      ردیاب موتور      *      صرافی تتر      بروکر فارکس      +      خرید کتاب تاپ ناچ      +      *      تحلیل اتریوم      -      فیلم هندی      *      -      -      .      +      -      +      -      /      حواله وسترن یونیون      کربنات کلسیم      خرید ماینر      -      دکتر زنان مشهد      خرید لایسنس نود 32      کسب درآمد      خرید رپورتاژ      فروش آنتی ویروس      سیگنال فارکس      لایسنس رایگان نود 32      یوزر پسورد نود 32      سئو سایت      لایسنس نود32      آپدیت نود 32      بهترین بک لینک     
What is two-shot injection molding?  howard howard .

howard

What is two-shot injection molding?

The entire two-shot molding equipment has paid attention to dual-image molding. Take out a piece of fabric from the article, and then in the secondary molding device, the mold jumps from another lens barrel to the relevant cavity by rotating the mold. This aspect is usually used as an input for another fabric to produce an internal by-product sheet. The injection molding equipment is double-tube and double-cavity. .mould supplierInjection molding technology is a project that produces two products at the same time, but the project with only one cavity will enter the next cavity for input. Bi-figure injection technology innovation is also called two-material injection technology know-how. It is indeed a technology that combines two types of fabric items of plastic materials into plastic material products through injection molding. The engineering connotation is actually the use of plastic to build and weld from the mold. Therefore, the basic concept is always to plasticize the uncooked components of two different plastic types, and then injection weld and position them to achieve the purpose of secondary molding.


The other is additional molding, a two-cycle or several indeterminate injection molding technology. By using the injection molding system to design a part of the compound, it is found that it is an insert of another mold, and then has a second chemical. The best description is that secondary molding is the first time in a plastic molding machine. Throw the substance into the injection molded product, this is of course the complete work you need. Overmolding is actually a product that is molded by injection before and after molding.



Since the additional injection molding equipment is affected in its creation use, two identical unit injection plasticization projects are required. This is not only a practical prerequisite, but also a prerequisite for rotation and transformation functions. Coupled with exactly the same structure, two exactly the same injection molded products must also have the same function. During the injection molding process, the natural material temperature, injection pressure, and injection volume of the two sets of small tools may be adjusted uniformly to keep the managed plastic items within the same range, and then the link welding work is performed. If the specific situation of the two teams is irregular, try to adapt to the same stage.


like

Different forms of tension in injection molding 


Mold injections stress and injections pace

How does temperature affect the quality of plastic molded parts?


برچسب: ،
امتیاز:
 
بازدید:
+ نوشته شده: ۱۸ آذر ۱۴۰۰ساعت: ۱۰:۵۸:۲۲ توسط:howard موضوع:

ارسال نظر
نام :
ایمیل :
سایت :
آواتار :
پیام :
خصوصی :
کد امنیتی :